In stock To send
A MultiPlus, plus ESS (Energy Storage System) functionality
The MultiPlus-II is a multifunctional inverter/charger with all the features of the MultiPlus, plus an external current sensor option which extends the PowerControl and PowerAssist function. The MultiPlus-II is ideally suited for professional marine, yachting, vehicle and land based off-grid applications. It also has built-in anti-islanding functionality, and an increasingly long list of country approvals for ESS application. Several system configurations are possible. For more detailed information see the ESS Design and configuration manual.
PowerControl and PowerAssist - Boosting the capacity of the grid or a generator
A maximum grid or generator current can be set. The MultiPlus-II will then take account of other AC loads and use whatever is extra for battery charging, thus preventing the generator or grid from being overloaded (PowerControl function).
PowerAssist takes the principle of PowerControl to a further dimension. Where peak power is so often required only for a limited period, the MultiPlus-II will compensate insufficient generator, shore or grid power with power from the battery. When the load reduces, the spare power is used to recharge the battery.
Solar energy: AC power available even during a grid failure
The MultiPlus-II can be used in off grid as well as grid connected PV and other alternative energy systems. It is compatible with both solar charger controllers and grid-tie inverters.
Two AC Outputs
The main output has no break functionality. The MultiPlus-II takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus-II. Loads that should not discharge the battery, like a water heater for example, can be connected to this output.
Virtually unlimited power thanks to parallel and three phase operation
Up to 6 Multis can operate in parallel to achieve higher power output. Six 48/5000/70 units, for example, will provide 25 kW / 30 kVA output power with 420 Amps charging capacity. In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a 75 kW / 90 kVA inverter and more than 1200 Amps charging capacity.
On-site system configuring, monitoring and control
Settings can be changed in a matter of minutes with VEConfigure software (computer or laptop and MK3-USB interface needed). Several monitoring and control options are available: Color Control GX, Venus GX, Octo GX, CANvu GX, laptop, computer, Bluetooth (with the optional VE.Bus Smart dongle), Battery Monitor, Digital Multi Control Panel.
Remote configuring and monitoring
Install a Color Control GX or other GX product to connect to the internet. Operational data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge. When connected to the internet, systems can be accessed remotely, and settings can be changed.
SPECIFICATIONS
Inverter
DC Input voltage range: DC 38-66 V
Cont. output power at 25 °C: 3000 VA / 2400 W
Output: AC 230 V (50/60 Hz)
Transfer switch: 32 A
Maximum AC input current: 32 A
Weight: 18 kg
Dimensions: 506 x 275 x 147 mm
Charger
AC Input: AC 187-265 V (45-65 Hz)
Charge voltage (absorption/float/storage): DC 57,6 / 55,2 / 52,8 V
Maximum battery charge current: 35 A
The most common operating modes:
Brand | |
Type specification : | Voltage converter (15-50 kg) |
Manufacturer : | VICTRON |
Technical specification | |
Max. operating temperature (°C) : | 65 |
Min. operating temperature (°C) : | -40 |
Ingress protection : | IP21 |
Output voltage shape : | sinus |
Power supply | |
Frequency (Hz) : | 50/60 |
Phase : | single-phase |
Input Voltage (V) : | 38 - 66 (DC) |
Output voltage (V) : | 230 (AC) |
Output Power (W) : | 2400 |
Warranty | |
Warranty period EU (months) : | 60 |
Warranty period CRN (months) : | 60 |
Physical properties | |
Weight (kg) : | 19 |
Dimensions : | 506 × 275 × 147 mm |
Additional equipment and features | |
PPDS certifikát : | yes |
Certification mark : | EN, EN-IEC, ISO, UNE, TOR, UTE, RD, NRS, G98/99, ESS |
Code: SOPGWL0456
Code: SOPGWL0159
Code: SOPVIC0001
Code: SOPGWL0457
Code: SOPGWL0456
Code: SOPGWL0159
Code: SOPVIC0001
Code: SOPGWL0457
Code: SOPGWL0456
Code: SOPGWL0159
Code: SOPVIC0001
Code: SOPGWL0457
Code: SOPGWL0508
Code: UPSSEA0006
Code: UPSSEA0002
Code: UPSSEA0004
Code: UPSSEA0005
Code: UPSSEA0006
Code: UPSSEA0002
Code: UPSSEA0004
Code: UPSSEA0005
Code: UPSSEA0006
Code: UPSSEA0002
Code: UPSSEA0004
Code: UPSSEA0005
Code: UPSSEA0001
Code: SOPGWL0002
Code: ELEGWL0011
Code: ELEGWL0010
Code: SOPSMI0011
Code: SOPSMI0049
Code: SOPSMI0037
Code: ELEGWL0172
Code: SOPSMI0019
Code: SOPSMI0012
Code: SOPSMI0013
Code: SOPSMI0038
Code: SOPSMI0033
Code: SOPSMI0036
Code: SOPSMI0020
Code: SOPSMI0023
Code: SOPSMI0024
Code: SOPSMI0021
Code: ELEGWL0022
Code: ELEGWL0011
Code: ELEGWL0010
Code: SOPSMI0011
Code: SOPSMI0049
Code: SOPSMI0037
Code: ELEGWL0172
Code: SOPSMI0019
Code: SOPSMI0012
Code: ZNKSMI0012
Code: ZNKSMI0011
Code: SOPGWL0169
Code: ZNKSMI0012
Code: ZNKSMI0011
Code: SOPGWL0169
Code: ZNKSMI0012
Code: ZNKSMI0011
Code: SOPGWL0169
Like all websites, we use cookies on this website. They help us to make the site work properly but also to improve our site by measuring traffic.
The law requires us to ask for your consent to do this. You can change or revoke your consent at any time on the Settings page.