Úvod   Ostatní   Síťové speciality   Tinycontrol LAN ovladač v3.9

LAN controller with relay V3.9

hodnotit
1 789 CZK 1 479 CZK bez DPH

Skladem K odeslání

Kód: NJSGWL0076 PN: LK3.9 Záruka: 26 months
Výrobce: TINYCONTROL
Tinycontrol LAN Controller v3.9 LK3.9 is continuation of v3.5 series. It has same API. Is recommended for typical monitoring and automatization applications in IT enviroment. This version is equipped with a faster... více
Počet:
Přidat do košíku

Oblíbené
Porovnat
Tisknout
Poslat známému
Tinycontrol LAN Controller v3.9

LK3.9 is continuation of v3.5 series. It has same API. Is recommended for typical monitoring and automatization applications in IT enviroment. This version is equipped with a faster processor ARM 32F407. It has the same functions but different firmware series since v3.5.
The device features a built-in web server (similar to all LK versions) for viewing readings and configuring settings via a web browser.

Key Features:

  • 2 analog inputs with switchable gain (measuring from 1 mV to 33 V): suitable for measuring voltage, DC current, AC current (with additional sensors), pressure sensors, thermocouples, distance sensors, photoresistors for light measurement, and many more.
  • 2 analog inputs with switchable gain (measuring from 1 mV to 55 V): for measuring voltage, DC current, AC current (with additional sensors), pressure sensors, thermocouples, distance sensors, photoresistors for light measurement, and others.
  • 2 analog inputs for measurements up to 3.3 V: for voltage and current measurements (DC and AC via additional sensors) and 4-20mA converters.
  • I2C bus for connecting sensors via RJ12 connector: supports a wide range of I2C sensors (list below) and DS18B20 via the 1-Wire bus.
  • Serial bus (UART).
  • Bus for RS485 converter - MODBUS RTU (additional board required): allows reading pre-configured devices and setting up configurations to read any device using the Modbus protocol.
  • 4 logic inputs: as status sensors for door monitoring, infrared motion sensors, buttons for manual switching with a bistable mode option, pulse counters for energy meters, and timers for input resets.
  • 1 relay (NO, C, NC).
  • 1 transistor output: power supply voltage output, for controlling loads with up to 0.5A current consumption.
  • 4 outputs for relay/transistor switching in OC standard.
  • 4 PWM outputs from 50 Hz to 100 kHz.
  • Measurement of supply voltage and on-board temperature.
  • Ethernet communication (10/100Mb) with 802.3af PoE support.
  • Management via a web interface.

BASIC SPECIFICATIONS

Supply Voltage: DC 8–55 V
Power Consumption: 0.5 W
PoE: Yes (802.3af) Mode A, passive Mode B with jumper
Interface: Ethernet 10/100 Mbit/s, Wi-Fi 2,4 GHz 802.11n, RS485 Modbus RTU
Power output for Modbus devices: 12V, 200mA
Operating Temperature: -20 to +85 °C
Dimensions: 66x79x40 mm (without DIN mount)
Weight: 90 g

Applications:

IT:
Monitoring temperature and humidity in server cabinets, controlling ventilation and heating.
Monitoring door access.
Monitoring battery voltage, power supplies, and grid power outages.
ISP watchdog for Ethernet connection monitoring and device resets.
Sending input states and environmental parameters overlaid on IP camera images (e.g., Dahua).

INSTALLATIONS:
Temperature monitoring and basic automation for central heating systems.
Monitoring temperature and pressure for solar systems, with basic automation.
Monitoring heat pump operation with data presentation on Internet graphs.
Monitoring supply voltage and automatic switching to backup sources.
Remote energy consumption monitoring via Modbus meters or pulse inputs.
Remote switching of devices from a simple operator panel.
Network-based (wired or wireless) command transmission between multiple LK devices.

SMART HOME:
Automated control based on time and specific settings, e.g., turning on a heater when the temperature drops below a set level.
Remote control of outputs via mobile devices.
Automated light or device control based on schedule or remote commands.
Combined control from wall switches and the device.
Dusk switch functionality.

RENEWABLE ENERGY:
Monitoring solar panel performance.
Monitoring wind turbine performance.
Basic battery charging control.
Measuring DC energy consumption.
Measuring AC energy consumption and inverter production.

AGRICULTURE:
Monitoring and controlling temperature and humidity in greenhouses.
Cyclical control of feeders and other equipment in animal farming.
Irrigation systems.

Brand
Type specification :  Network specialties
Manufacturer :  TINYCONTROL
Technical specification
Max. operating temperature (°C) :  85
Min. operating temperature (°C) :  -20
Network interfaces
Wi-Fi frequency :  2400 MHz
Standards :  802.11n, 802.3af
Inputs and outputs
RJ-45 :  1
Warranty
Warranty period EU (months) :  26
Warranty period CRN (months) :  26
Physical properties
Color :  zelená
Weight (kg) :  0.09
Dimensions :  79 × 66 × 40 mm
Hodnocení můžou přidávat pouze přihlášení uživatelé a ti kteří produkt zakoupili

Podobné produkty

Scroll