Úvod   Příslušenství   Pojistky a jističe   Xtend Solarmi OSPD23

Surge protector OSPD23, outdoor SPD T1+T2 2+3 , 1010 Vdc, 30A, CE

hodnotit
Akce
4 013 CZK 3 317 CZK bez DPH

Skladem K odeslání

Kód: SOPSMI0026 PN: OSPD23 Záruka: 26 months
Výrobce: XTEND Solarmi
Xtend Solarmi OSPD23 Surge protector designed for the protection of photovoltaic equipment. The structure itself, considering weather conditions and mounting method, is made of aluminum alloy (the same material as the... více
Počet:
Přidat do košíku

Oblíbené
Porovnat
Tisknout
Poslat známému
Xtend Solarmi OSPD23

Surge protector designed for the protection of photovoltaic equipment. The structure itself, considering weather conditions and mounting method, is made of aluminum alloy (the same material as the supporting profiles of PV panels - no risk of electrochemical corrosion) with hermetically sealed internal circuits in polyurethane resin with an inert filler suppressing combustion.

The unit is designed for easy implementation into the string as a pass-through - both poles of the string connect to the unit and both also exit from it. The connection is made via standard MC4 connectors (with an integrated fuse on the input) and wires with cross-sections of 6 mm2 (in some versions also 10 mm2) with double insulation and color coding.

The connection of the PE wire or connection with LPS elements is made on the unit's chassis using an M10 (M8) screw through a crimped eye on a stranded wire >16 mm2 or directly through a T-screw connection with the supporting structure/LPS down conductor, or a combination thereof.

The SPD unit itself is of class T1 + T2, where due to its above-standard discharge capacity (12/25 kA), application on arrays with less than 4 down conductors is possible (according to ČSN EN 51643-32).

Note:
Due to the specific design and location, it is necessary to measure the residual current at the maximum operating voltage after each interruption of the integrated fuse (due to the operation of the SPD). If it is higher than the maximum manufacturer-specified value, the entire SPD module must be replaced. Indication of fuse interruption is the absence of voltage on the string circuit behind the SPD module.

BASIC SPECIFICATIONS

Design: Type 2: 3+2 (3 pairs 6mm2 input + 2 pairs 10mm2 output)
Maximum operating voltage between L+ and L-: 1010 V
Nominal load current: 30 A
Connecting wires: MC4, length: 25 cm, cross-section: 6/10 mm2
Response time ta: < 25 ns
Enclosure rating: IP67
Dimensions: 234 × 126 × 34.4 mm
Operating temperature: -40 to +85 °C

Brand
Type specification :  Other
Manufacturer :  XTEND Solarmi
Technical specification
Max. operating temperature (°C) :  85
Min. operating temperature (°C) :  -40
Inputs and outputs
Connector :  MC4
Warranty
Warranty period EU (months) :  26
Warranty period CRN (months) :  26
Physical properties
Dimensions :  234 × 126 × 34,4 mm
Hodnocení můžou přidávat pouze přihlášení uživatelé a ti kteří produkt zakoupili

Podobné produkty

  • Solar fuse switch OPVP14-2 63A
    Přidat do košíku
    Solar fuse switch OPVP14-2 63A
    744 CZK 615 CZK bez DPH

    Kód: ELEGWL0013

Scroll