Ubiquiti UniFi Access Gate Hub

8 580 CZK 7 091 CZK without VAT

Unknown availability

Code: PRSUBT0031 PN: UA-Hub-Gate Warranty: 26 months
Výrobce: UBIQUITI
Ubiquiti UniFi Access Gate Hub The UniFi Access Door Hub is an intelligent IP controller for a single gate, part of the UniFi Access solution. It allows seamless control of gate access via connected access readers or... more
Ubiquiti UniFi Access Gate Hub

The UniFi Access Door Hub is an intelligent IP controller for a single gate, part of the UniFi Access solution. It allows seamless control of gate access via connected access readers or intercoms. It complies with CE, FCC, IC, UL 294, and CAN/ULC-60839-11-1 (Class 1) certifications.

Input and Output Control:
Support for connecting up to four UniFi Access readers or UniFi Protect devices (camera or doorbell).

Peripheral Connectivity:
2 gate drive terminals: Dry
1 output relay for side door lock: 12 V
1 AUX output: for a siren
5 additional inputs: for sensors and buttons

Power and Connectivity:
PoE++ with a maximum consumption of 50 W (22 W without PoE outputs)
Integrated PoE passthrough port (4 PoE outputs, total 28 W)

Safety and Certifications:
UL 294 (Level I for destructive attack, line security, endurance, and standby power)
Certifications: CE, FCC, IC, UL 294, CAN/ULC-60839-11-1

Simple Installation and Control:
Compact dimensions and lightweight polycarbonate construction. Reset button for quick factory reset.

Example of use

SPECIFICATIONS

Mounting: DIN
Interfaces:
  • 1× reset button
  • 1× input for gate open request
  • 1× input for gate position
  • 1× input for side door open request
  • 1× input for side door position
  • 1× emergency state input
  • 5× 10/100/1000 Mbps RJ-45 (4× PoE outputs for readers and cameras)
  • 2× output relays for gate controller (dry contact)
  • 1× AUX output relay for connecting an external siren
  • 1× output relay for side door lock (powered 12 V)
    Power Supply: PoE++ 802.3bt, max consumption 50 W
    Operating Temperature: -30 to +60 °C
    Weight: 460 g
    Dimensions: 175 × 126 × 26 mm

     


    PoE Cabling Requirements
    Category 5e cable is the minimum recommended performance category. The performance category used should match the transmission rate required at the installation site.
    The minimum conductor cross-section allowed for connection between PSE or power injector and PD is 26 AWG (0.13 mm2) for patch cables; 24 AWG (0.21 mm2) for horizontal or riser cables.


    Recommended Max Cable Length 18 AWG
    UACC-Cable-DoorLockRelay
    20 AWG22 AWG24 AWG
    UA-Lock-Electric
    (400mA)
    100 m66 m42 m25 m
    UA-Lock-Magnetic-270kg
    (500mA)
    46 m30 m20 m12 m
    UA-Lock-Magnetic-540kg
    (800mA)
    80 m51 m32 m20 m
    Other locks
    (1A)
    36 m24 m15 m9 m



    Manual: Ubiquiti UniFi Access Gate Hub


    Brand
    Type specification :  Controller
    Manufacturer :  UBIQUITI
    Technical specification
    Outdoor use :  no
    Max. operating temperature (°C) :  60
    Min. operating temperature (°C) :  -30
    Placement :  DIN rail mounting
    Placement :  wall mounting
    Control
    Communication interface :  LAN
    Numeric keypad :  no
    Autonomous :  no
    Inputs and outputs
    Interface :  LAN, relay
    Power supply
    Input voltage (V) :  50 (PoE)
    PoE support :  yes
    Power consumption - typical (W) :  50
    Warranty
    Warranty period EU (months) :  26
    Warranty period CRN (months) :  26
    Security
    Smart Card Reader :  no
    Fingerprint Reader :  no
    Physical properties
    Color :  white
    Weight (g) :  460
    Dimensions :  175 × 126 × 26 mm
    Additional equipment and features
    Certification mark :  CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
    Hodnocení můžou přidávat pouze přihlášení uživatelé a ti kteří produkt zakoupili
  • Place:
    Jungmannova 627
    Kyjov
    697 01
    +420 606 761 321
    phcomp@phcomp.cz
    Follow us
    Scroll