Home   Solar Controllers   MPPT   EPEVER XTRA4415N G3 BLE MPPT Solar Regulator 12/24/48 V, XDS2, 40A, Input 150V

EPEVER XTRA4415N G3 BLE MPPT Solar Regulator 12/24/48 V, XDS2, 40A, Input 150V

Add recension
4 008 CZK 3 312 CZK without VAT

In stock To send

Code: SOPEPE0005 PN: XTRA4415N G3 BLE Warranty: 26 months
Výrobce: EPsolar
EPEVER XTRA4415N G3 BLE The new generation of MPPT controllers of the XTRA-N G3 BLE series with built-in Bluetooth is ideal for off-grid systems with panel voltage up to 150 V and a maximum charging current of 40 A. Battery... more
Count:
Add to Cart

Favorites
Compare
Print
Send to friend
EPEVER XTRA4415N G3 BLE

The new generation of MPPT controllers of the XTRA-N G3 BLE series with built-in Bluetooth is ideal for off-grid systems with panel voltage up to 150 V and a maximum charging current of 40 A. Battery 12/24/36/48 V, PV max 520/1040/1560/2080 Wp.

This solar charge controller is suitable for a wide range of off-grid applications such as cottages, houses, etc. It is also suitable for use in vehicles thanks to the option of negative grounding.

A multifunction display is integrated directly into the MPPT controller for easy system monitoring and setting of operating parameters, including control LED indicators.

Built-in Bluetooth allows monitoring and setting of the controller without the need for additional components.

The controller works as a converter, which means it can process higher input voltage and lower current into lower voltage/increased current with high efficiency. This allows you to use virtually any solar panel. The controller is compatible with lead-acid and lithium-ion batteries.

The solar controller features the latest MPPT technology (Maximum Power Point Tracking) – tracking the maximum power point using an advanced tracking algorithm, enabling the solar module to operate at the optimal voltage for the highest available output. Compared to traditional PWM controllers, MPPT technology increases charging efficiency by about 30%.

The maximum battery charging current of this model is 40 A, which corresponds to a panel output of 520 Wp for a 12V battery, 1040 Wp for a 24V battery, or 2080 Wp for a 48V battery. If the panel delivers a higher power output, the controller will simply limit it to its nominal maximum. The PV panel power must not exceed 1.5 times the nominal power of the controller!

You can connect solar panels in series, but their open circuit voltage (Voc) must never exceed 150 V – exceeding this value will permanently damage the controller (note that with decreasing ambient temperature, the panel voltage increases, and the Voc value listed in the panel specs is at 25 °C. Therefore, it is recommended not to exceed 130 V Voc).

The controller parameters (especially battery type) are set via the built-in LCD model XDS2, an external MT52 display (not included), or via built-in Bluetooth.

Main Features:

  • High-quality ST or IR components with low failure rates
  • Advanced MPPT technology and ultra-fast tracking speed, efficiency up to 99.5%
  • Maximum DC/DC efficiency up to 98.5%; full load efficiency is 97.2%
  • Advanced MPPT control algorithm
  • Accurate recognition and tracking of the maximum power point with multiple peaks
  • Wider MPP (Maximum Power Point) voltage range for optimal PV utilization
  • Supports multiple battery types, including lithium
  • Battery voltage parameters settable via display
  • Battery temperature compensation
  • Automatic power reduction in case of overheating
  • Built-in Bluetooth
  • Parameter settings via PC software, app, or display
  • Constant voltage output function
  • Comprehensive electronic protection
  • Operating modes for multiple loads
  • Dust- and water-resistant design with IP33 rating
  • Low self-consumption (less than 10 mA)

Protection Overview:

  • PV – short circuit, overcurrent, reverse polarity
  • Battery – reverse polarity, overvoltage, overheating, deep discharge, low lithium battery temperature
  • Load short circuit
  • Load overload
  • Controller overheating

BASIC SPECIFICATIONS

Nominal system voltage: DC 12/24/36/48 V
Battery input voltage range: 8–62 V
Battery type: lead-acid, lithium-ion
Rated charging current: 40 A
Max. PV open circuit voltage: 150 V (138 V at approx. 25 °C)
MPPT efficiency: ≥ 99.5%
Conversion efficiency: max. 98.5%
Protection level: IP33
Operating temperature: -25 to 50 °C, max. humidity ≤ 95%
Dimensions: 255 × 189 × 83.2 mm
Weight: 2.6 kg

Brand
Type specification :  Regulator
Manufacturer :  EPsolar
Technical specification
Maximum Power (W) :  2080
Max. operating temperature (°C) :  50
Min. operating temperature (°C) :  -25
Technology :  MPPT
Inputs and outputs
Connector :  terminal
Power supply
Rated Voltage (V) :  12/24/36/48
Max. input voltage (V) :  150
Warranty
Warranty period EU (months) :  26
Warranty period CRN (months) :  26
Physical properties
Depth (mm) :  83.2
Weight (kg) :  2.6
Width (mm) :  189
Height (mm) :  255
Hodnocení můžou přidávat pouze přihlášení uživatelé a ti kteří produkt zakoupili

Similar products

Scroll