Home   Solar Controllers   MPPT   EPEVER XTRA4210N G3 BLE MPPT Solar Regulator 12/24 V, XDS2, 40A, Input 100V

EPEVER XTRA4210N G3 BLE MPPT Solar Regulator 12/24 V, XDS2, 40A, Input 100V

Add recension
3 110 CZK 2 570 CZK without VAT

It will be in stock 28.5.2025

Code: SOPEPE0004 PN: XTRA4210N G3 BLE Warranty: 26 months
Výrobce: EPsolar
EPEVER XTRA4210N G3 BLE The new generation of MPPT controllers from the XTRA-N G3 BLE series with built-in Bluetooth is ideal for off-grid systems with panel voltages up to 100V and a maximum charging current of 40A.... more
Count:
Add to Cart

Favorites
Compare
Print
Send to friend
EPEVER XTRA4210N G3 BLE

The new generation of MPPT controllers from the XTRA-N G3 BLE series with built-in Bluetooth is ideal for off-grid systems with panel voltages up to 100V and a maximum charging current of 40A. Battery 12/24V, PV max 520/1040 Wp.

This solar controller is suitable for a wide range of off-grid applications such as cottages, houses, etc. It is also suitable for use in vehicles due to the option for negative grounding.

The MPPT controller features an integrated multifunction display for easy system monitoring and setting of operating parameters, including indicator LEDs.

Built-in Bluetooth allows monitoring and configuration of the controller without the need for additional components.

The controller functions as a converter, meaning it can process higher input voltage and lower current into lower voltage/higher current with high efficiency. This allows the use of virtually any solar panel. The controller is compatible with lead-acid and lithium-ion batteries.

The solar controller is equipped with the latest MPPT (Maximum Power Point Tracking) technology – with an advanced tracking algorithm that ensures the solar module operates at the optimal voltage for the highest available power. Compared to traditional PWM controllers, MPPT technology increases charging efficiency by about 30%.

The maximum battery charging current for this model is 40 A, which corresponds to 520 Wp of panel output for a 12V battery, or 1040 Wp for a 24V battery. If the panel produces more power, the controller will limit it to its nominal maximum. PV panel output should not exceed 1.5 times the controller’s nominal power!

You can connect solar panels in series, but their open-circuit voltage (Voc) must never exceed 100V – exceeding this value will permanently damage the controller. (Note that as ambient temperature drops, solar panel voltage rises, and the Voc listed in panel specs is measured at 25°C. Therefore, we recommend that the Voc not exceed 90V.)

Controller parameter settings (primarily battery type) can be configured via the built-in XDS2 LCD, an external MT52 display (not included), or the built-in Bluetooth.

Key Features:

  • High-quality ST or IR components with low failure rates
  • Advanced MPPT technology and ultra-fast tracking speed, efficiency up to 99.5%
  • Max. DC/DC conversion efficiency up to 98.5%; full-load efficiency 97.2%
  • Advanced MPPT control algorithm
  • Accurate recognition and tracking of multiple power peaks
  • Wider MPP (Maximum Power Point) voltage range for optimized PV use
  • Supports various battery types including lithium
  • Battery voltage parameter settings on the display
  • Battery temperature compensation
  • Automatic charging power reduction when overheating
  • Built-in Bluetooth
  • Parameter settings via PC software, app, or display
  • Constant voltage output function
  • Comprehensive electronic protection
  • Operating modes for multiple loads
  • Dustproof and waterproof design with IP33 rating
  • Low self-consumption (less than 10mA)

Protection Overview:

  • PV - short circuit, overcurrent, reverse polarity
  • Battery - reverse polarity, overvoltage, overheating, deep discharge, low lithium battery temperature
  • Load short circuit
  • Load overload
  • Controller overheating

TECHNICAL SPECIFICATIONS

Rated system voltage: DC 12/24 V
Battery input voltage range: 8–32 V
Battery type: lead-acid, lithium-ion
Rated charging current: 40 A
Max. PV open-circuit voltage: 100 V (92 V at approx. 25 °C)
MPPT efficiency: ≥ 99.5 %
Conversion efficiency: max. 98.6 %
Ingress protection: IP33
Operating temperature: -25 to 50 °C, max. humidity 95 %
Dimensions: 255 × 185 × 67.8 mm
Weight: 1.7 kg

Brand
Type specification :  Regulator
Manufacturer :  EPsolar
Technical specification
Maximum Power (W) :  1040
Max. operating temperature (°C) :  50
Min. operating temperature (°C) :  -25
Technology :  MPPT
Inputs and outputs
Connector :  terminal
Power supply
Rated Voltage (V) :  12/24
Max. input voltage (V) :  100
Warranty
Warranty period EU (months) :  26
Warranty period CRN (months) :  26
Physical properties
Depth (mm) :  67.8
Weight (kg) :  1.72
Width (mm) :  187
Height (mm) :  255
Hodnocení můžou přidávat pouze přihlášení uživatelé a ti kteří produkt zakoupili

Similar products

Scroll