EPEVER XTRA2210N G3 BLE MPPT Solar Regulator 12/24 V, XDS2, 20A, Input 100V

2 211 CZK 1 828 CZK without VAT

In stock To send

Code: SOPEPE0003 PN: XTRA2210N G3 BLE Warranty: 26 months
Výrobce: EPsolar
EPEVER XTRA2210N G3 BLE The new generation of MPPT controllers of the XTRA-N G3 BLE series with built-in Bluetooth is ideal for off-grid systems with panel voltage up to 100 V and a maximum charging current of 20 A. 12/24 V... more
EPEVER XTRA2210N G3 BLE

The new generation of MPPT controllers of the XTRA-N G3 BLE series with built-in Bluetooth is ideal for off-grid systems with panel voltage up to 100 V and a maximum charging current of 20 A. 12/24 V batteries, PV max 260/520 Wp.

This solar controller is suitable for a wide range of off-grid applications, such as cottages, homes, etc. It is also suitable for use in vehicles thanks to the ability to ground to the negative pole.

A multifunctional display is integrated directly into the MPPT controller for easy system monitoring and setting of operating parameters, including LED indicators.

Built-in Bluetooth connection allows monitoring and configuring the controller without the need for additional components.

The controller works as a converter, meaning it can process higher input voltage and lower current into lower voltage/increased current with high efficiency. This allows the use of practically any solar panel. The controller is compatible with lead-acid and lithium-ion batteries.

The solar controller is equipped with the latest MPPT technology (Maximum PowerPoint Tracking) – tracking the point of maximum power using an advanced algorithm, ensuring that the solar module operates at the optimal voltage for maximum available performance. Compared to a conventional PWM controller, MPPT technology increases charging efficiency by approximately 30%.

The maximum charging current to the battery of this model is 20 A, which corresponds to a panel output of 260 Wp with a 12V battery or 520 Wp with a 24V battery. If the panel delivers higher power, the controller will simply limit it to its rated max output. The PV panel output must not exceed 1.5 times the nominal controller rating!

You can connect solar panels in series, but their open circuit voltage (Voc) must never exceed 100 V – exceeding this value will permanently damage the controller (note that panel voltage increases as ambient temperature drops, and the specified Voc is given at 25 °C. Therefore, it is recommended not to exceed 90 V Voc in real-world use).

Controller parameter settings (especially battery type) are configured via the built-in LCD (XDS2), an external MT52 display (not included), or the built-in Bluetooth.

Main Features:

  • High-quality ST or IR components with low failure rate
  • Advanced MPPT technology with ultra-fast tracking speed, efficiency up to 99.5%
  • Maximum DC/DC conversion efficiency up to 98.3%; full load efficiency is 96.4%
  • Advanced MPPT control algorithm
  • Accurate recognition and tracking of maximum power point even with multiple peaks
  • Wider MPP operating voltage range for optimized PV usage
  • Support for multiple battery types including lithium
  • Battery voltage parameter setting via display
  • Battery temperature compensation
  • Automatic charging power reduction when overheating
  • Built-in Bluetooth
  • Parameter setting via PC software, app, or display
  • Constant voltage output function
  • Comprehensive electronic protection
  • Multiple load working modes
  • Dust- and water-resistant design with IP33 rating
  • Low self-consumption (less than 10 mA)

Protection Overview:

  • PV – short circuit, overcurrent, reverse polarity
  • Battery – reverse polarity, overvoltage, overheating, over-discharge, low lithium battery temperature
  • Load short circuit
  • Load overload
  • Controller overheating

BASIC SPECIFICATIONS

Rated system voltage: DC 12/24 V
Battery input voltage range: 8–31 V
Battery type: lead-acid, lithium-ion
Rated charging current: 20 A
Max. PV open circuit voltage: 100 V (92 V at approx. 25 °C)
MPPT efficiency: ≥ 99.5%
Conversion efficiency: max. 98.3%
Ingress protection rating: IP33
Operating temperatures: -25 to 50 °C, max. humidity ≤ 95%
Dimensions: 217 × 158 × 56.5 mm
Weight: 0.97 kg

Brand
Type specification :  Regulator
Manufacturer :  EPsolar
Technical specification
Maximum Power (W) :  520
Max. operating temperature (°C) :  50
Min. operating temperature (°C) :  -25
Technology :  MPPT
Inputs and outputs
Connector :  terminal
Power supply
Rated Voltage (V) :  12/24
Max. input voltage (V) :  100
Warranty
Warranty period EU (months) :  26
Warranty period CRN (months) :  26
Physical properties
Depth (mm) :  56.5
Weight (kg) :  0.97
Width (mm) :  158
Height (mm) :  217
Hodnocení můžou přidávat pouze přihlášení uživatelé a ti kteří produkt zakoupili

Similar products

Scroll