Home   Solar Controllers   MPPT   EPEVER XTRA3210N G3 BLE MPPT Solar Regulator 12/24 V, XDS2, 30A, Input 100V

EPEVER XTRA3210N G3 BLE MPPT Solar Regulator 12/24 V, XDS2, 30A, Input 100V

Add recension
2 415 CZK 1 996 CZK without VAT

In stock To send

Code: SOPEPE0001 PN: XTRA3210N-XDS2 G3 BLE Warranty: 26 months
Výrobce: EPsolar
EPEVER XTRA3210N-XDS2 G3 BLE The new generation of MPPT controllers from the XTRA-N G3 BLE series, equipped with built-in Bluetooth, is ideal for off-grid systems with panel voltages up to 100 V and a maximum charging power... more
Count:
Add to Cart

Favorites
Compare
Print
Send to friend
EPEVER XTRA3210N-XDS2 G3 BLE

The new generation of MPPT controllers from the XTRA-N G3 BLE series, equipped with built-in Bluetooth, is ideal for off-grid systems with panel voltages up to 100 V and a maximum charging power of 30 A. It supports batteries with 12/24 V and a maximum solar input of 390/780 Wp. The built-in Bluetooth allows for monitoring and configuration of the controller without the need for additional components.

This solar controller is suitable for a wide range of off-grid applications, such as cottages, houses, etc. It's also ideal for vehicles due to its ability to ground to the negative pole. The integrated multifunctional display makes it easy to monitor the system and configure operational parameters, including control LEDs.

The controller acts as a converter, which means it can handle higher input voltage and lower current, converting it to lower voltage/higher current with high efficiency. As a result, you can use almost any solar panel. The controller is compatible with lead-acid and lithium-ion batteries.

Equipped with the latest MPPT technology (Maximum Power Point Tracking) featuring an advanced tracking algorithm, this controller ensures that the solar module operates at the ideal voltage to produce the highest possible output. Compared to traditional PWM controllers, MPPT technology can boost charging efficiency by around 30%.

The maximum charging power to the battery is 30 A, which corresponds to a panel capacity of 390 Wp for a 12V battery, or 780 Wp for a 24V battery. If the panel generates more power, the controller will limit the output to its nominal maximum. The output power of solar panels must not exceed 1.5 times the controller's nominal power!

Solar panels can be connected in series, but their open-circuit voltage (Voc) must never exceed 100 V – exceeding this limit will permanently damage the controller (note that with decreasing ambient temperature, the voltage of the solar panel increases, and the Voc value specified on the panel refers to a temperature of 25°C. We recommend not exceeding a Voc of 90 V).

Controller parameters (such as battery type) can be configured via the built-in LCD display XDS2, an external MT52 display (not included), or through built-in Bluetooth.

Main Features:

  • High-quality ST or IR components with low failure rates for durability
  • Advanced MPPT technology with ultra-fast tracking, efficiency up to 99.5%, and a maximum DC/DC conversion efficiency of 98.6%
  • Precise recognition and tracking of multiple power peaks, with wider MPP voltage ranges to optimize solar utilization
  • Supports multiple battery types, including lithium batteries, with a stable self-activation feature for lithium batteries
  • Battery voltage parameters adjustable via LCD display
  • Battery temperature compensation
  • Real-time energy statistics
  • Automatic power reduction when overheating
  • Built-in Bluetooth for easy setting adjustments
  • EPEVER APPRS485 communication interface with optional 4G or Wi-Fi modules for remote monitoring
  • Adjustable parameters via PC software, app, or remote meter
  • Constant voltage output function
  • Comprehensive electronic protection
  • Supports multiple load operating modes
  • Dustproof and waterproof design with IP33 rating
  • Low self-consumption, less than 15 mA

Protection Features:

  • Solar panel – short circuit, overcurrent, reverse polarity
  • Battery – reverse polarity, overvoltage, overheating, over-discharge, low lithium battery temperature
  • Load – short circuit, overload
  • Controller overheating

BASIC SPECIFICATIONS

Nominal system voltage: DC 12/24 V
Battery input voltage range: 8–32 V
Battery type: Lead-acid, lithium-ion
Nominal charging current: 30 A
Maximum PV open-circuit voltage: 100 V (92 V at around 25°C)
MPPT efficiency: ? 99.5%
Conversion efficiency: Max. 98.6%
IP rating: IP33
Operating temperature: -25°C to 50°C, max. humidity 95%
Dimensions: 230 × 165 × 63 mm
Weight: 1.3 kg

Brand
Type specification :  Regulator
Manufacturer :  EPsolar
Technical specification
Maximum Power (W) :  780
Max. operating temperature (°C) :  50
Min. operating temperature (°C) :  -25
Technology :  MPPT
Inputs and outputs
Connector :  terminal
Power supply
Rated Voltage (V) :  12/24
Max. input voltage (V) :  100
Warranty
Warranty period EU (months) :  26
Warranty period CRN (months) :  26
Physical properties
Depth (mm) :  63
Weight (kg) :  1.3
Width (mm) :  165
Height (mm) :  230
Hodnocení můžou přidávat pouze přihlášení uživatelé a ti kteří produkt zakoupili

Similar products

  • Victron SmartSolar 100/50 MPPT Solar Regulator
    Add to Cart
    Victron SmartSolar 100/50 MPPT Solar Regulator
    4 781 CZK 3 952 CZK without VAT

    Code: SOPGWL0280

Scroll