Home   Solar Controllers   MPPT   MPPT Solar Regulator 12/24 V, XDS2, 10A, Input 100V (XTRA1210N)

MPPT Solar Regulator 12/24 V, XDS2, 10A, Input 100V (XTRA1210N)

Add recension
1 420 CZK 1 174 CZK without VAT
Common price: 1 457 CZK

In stock To send

Code: SOPGWL0048 PN: XTRA1210N-XDS2 Warranty: 26 months
Výrobce: EPsolar
EPEVER XTRA1210N-XDS2 The EPEVER XTRA1210N-XDS2 is a user-friendly MPPT charge controller designed to manage the energy flow from a solar panel or power source to batteries and loads. It operates with 12V or 24V systems and... more
Count:
Add to Cart

Favorites
Compare
Print
Send to friend
EPEVER XTRA1210N-XDS2

The EPEVER XTRA1210N-XDS2 is a user-friendly MPPT charge controller designed to manage the energy flow from a solar panel or power source to batteries and loads. It operates with 12V or 24V systems and supports currents up to 10A. The maximum input voltage is 100V. This new generation of XTRA solar controllers builds upon the TracerA series, enhancing the MPPT algorithm for improved performance under rapid shading changes and providing direct support for LiFePO4 batteries. Support for lead-acid/GEL/AGM batteries is also included.

This solar controller is suitable for a wide range of off-grid applications such as cottages and homes. It is also ideal for use in vehicles due to the option for negative grounding. The MPPT controller includes a built-in multifunctional display for easy system monitoring and configuration, with LED indicators for quick status updates. While most parameters can be set via the display, custom battery settings require the use of additional accessories.

The maximum charging current to the battery of this model is 10A, corresponding to a panel output of 130 Wp for a 12V battery or 260 Wp for a 24V battery. If the panel exceeds this output, the controller will limit it to its maximum. The power of the solar panels must not exceed 1.5 times the controller's nominal power!

The open-circuit voltage (Voc) must never exceed 100V – exceeding this value will permanently damage the controller. Keep in mind that as the ambient temperature decreases, the voltage of the solar panel increases, and the Voc value provided in the solar panel specifications is at 25°C. We recommend keeping the Voc below 90V.

The controller settings can be configured using the built-in LCD (in the highest XDS2 version) or an external display like the MT50 (see below).

The main advantage is the use of advanced MPPT (Maximum Power Point Tracking) technology, which increases the efficiency of the entire system by 30% or more. The MPPT technology ensures maximum utilization of energy supplied by the PV panel by selecting the working point with the maximum output power. This point is continuously monitored and maintained, compensating for all effects of temperature, varying light intensity, etc.

Quick Installation:

  • Connect the battery to the solar controller. Install a suitably rated DC fuse on the positive wire as close to the battery pole as possible (position 3).
  • Connect the load (position 4).
  • Connect the solar panel (position 2).

Key Features:

  • Built-in multifunctional LCD display for complete monitoring and parameter setting
  • High IP32 protection rating
  • Back panel made of molded aluminum for efficient cooling
  • Communication port uses a professional protection chip that can provide 5V DC power and has protection against overcurrent and short circuits.
  • Advanced MPPT technology with at least 99.5% efficiency
  • Advanced MPPT control algorithm for minimizing loss rate and loss time
  • High-quality components with 98% conversion efficiency
  • Accurate recognition and tracking of the maximum power point
  • Automatic charging power and current limiting
  • Wide MPP operating voltage range
  • Compatible with lead-acid and lithium-ion batteries (PC settings required)
  • Battery temperature compensation function
  • Real-time operating statistics function
  • Overheat temperature reduction function
  • RS-485 communication interface with Modbus protocol
  • Monitoring and settings via mobile phone or PC
  • Comprehensive electronic protections

Protection Overview:

  • Overcurrent from solar panels
  • Short circuit on panel input
  • Input reverse polarity
  • Battery reverse polarity
  • Battery overvoltage
  • Excessive battery discharge
  • Battery overheating
  • Low temperature of lithium battery
  • Load short circuit
  • Load overload
  • Controller overheating

BASIC SPECIFICATIONS

Nominal system voltage: 12/24 V DC or auto
Battery input voltage range: 8–32 V
Battery type: lead-acid, lithium-ion
Nominal charging current: 10 A
Max. PV open-circuit voltage: 100 V (92 V at approx. 25°C)
MPPT efficiency: ≥ 99.5%
Conversion efficiency: max. 98%
Dimensions: 175 × 143 × 48 mm
Weight: 0.57 kg

RJ-45 interface (RS-485 MODBUS open architecture) allows connection to a PC, converter, or external display REG-MT50 for real-time operation setting/monitoring.

TIP: This MPPT solar controller can be monitored on your PC with Windows OS. Use the product Communication converter for PC for Tracer and XTRA controllers (RS-485/USB) for this purpose.
Learn how to easily monitor and log system usage.

The manufacturer EPsolar is currently the largest producer of solar controllers, and based on more than eight years of our own experience with its products, we recommend this model as a highly

Brand
Type specification :  Regulator
Manufacturer :  EPsolar
Technical specification
Maximum Power (W) :  260
Max. operating temperature (°C) :  50
Min. operating temperature (°C) :  -25
Technology :  MPPT
Inputs and outputs
Connector :  terminal
Power supply
Rated Voltage (V) :  12/24
Max. input voltage (V) :  100
Max. Input Current (A) :  10
Warranty
Warranty period EU (months) :  26
Warranty period CRN (months) :  26
Physical properties
Depth (mm) :  48
Weight (kg) :  0.57
Dimensions :  255 × 185 × 68 mm
Width (mm) :  143
Height (mm) :  175
Hodnocení můžou přidávat pouze přihlášení uživatelé a ti kteří produkt zakoupili

Similar products

Scroll